Akumuliatorinis teleskopinis LED dirbtuvių šviestuvas variklio skyriui | 1200 lm (YT-08535) (Код: YT-08535)

Index
YT-08535
Barcode
5906083131080
Unit of measure
PCE
Volume
19.063
Weight
1.875 The professional workshop lamp YT-08535 is designed for illuminating engine compartments, workspaces, and areas with limited light access. Thanks to its telescopic design with the ability to extend on both sides and an adjustable length of up to 1870 mm, it allows for stable mounting directly within the engine compartment of most passenger and commercial vehicles. The efficient LED module generates a luminous flux of up to 1200 lm, providing even illumination across the entire work area. The lamp is equipped with 120 SMD LEDs emitting light with a color temperature of 5500-6500 K, similar to daylight. The high luminous flux and color rendering index CRI 80 facilitate the identification of wires, connections, leaks, and other components located in the engine compartment. The efficient battery ensures long operating time without the need for connecting power cables, and the electronic light control system allows for adjusting the light intensity to the current working conditions. Light source: 120 SMD 2835 LEDs
maximum luminous flux: 1200 lm
color temperature: 5500-6500 K
color rendering index CRI: 80
Modes and operating time: low mode: 480 lm – up to 6 hours of operation
high mode: 1200 lm – up to 2 hours of operation
smooth brightness adjustment (dimming)
switch functions: LOW (low mode) – HIGH (high mode) – OFF (turn off)
light intensity adjustment by holding the button
Power source: efficient Li-Ion battery (type 21700)
voltage: 3.7 V
capacity: 4000 mAh
operating time: 2-6 hours
charging time: approx. 4 hours
USB-C charging port
charge level indicator with 4 LEDs
Construction and features: ability to extend on both sides
working length adjustable in the range of 1214-1870 mm
quick adjustment to the width of the engine compartment
stable support without the need for additional brackets
2 magnets for mounting on steel elements
2 rotating hooks 360°
housing made of aluminum and durable ABS plastic
protection rating IPX4
mechanical resistance IK07
high durability and splash resistance
dimensions: 130 x 77 x 1214 mm
weight: 1080 g
​​​ABS – a durable material resistant to intensive use, scratches, and chemical substances. IPX4 – protection against splashes and water sprays falling from any direction. IK07 – mechanical resistance to impacts with energy up to 2 J (a 0.5 kg drop from a height of 40 cm). CRI 80 – a high color rendering index ensures natural color reproduction, facilitating the identification of wires, installation components, and areas requiring repair.