Mоющий пылесос с функцией пароочистителя, 1800 Вт (YT-85725) (Код: YT-85725)

YATO YT-85725 is a multifunctional carpet cleaner with a steam cleaner function, designed for cleaning upholstery, carpets, and rugs, as well as maintaining various moisture-resistant surfaces. Four operating modes allow you to select the cleaning method according to the type of dirt and material properties – using cold or hot water and steam.

During extraction cleaning, the device delivers water to the surface being cleaned, facilitating the dissolution of dirt, and then extracts the dirty liquid into a separate tank. The extraction brush additionally aids in the mechanical removal of contaminants. Effective water extraction reduces the amount of moisture remaining in the material and speeds up drying. The steam function at temperatures up to 100°C expands the device's capabilities to clean and refresh surfaces such as tiles, fixtures, shower cabins, mirrors, windows, and fabrics, without the need for aggressive chemicals.

Spacious tanks, a suction power of up to 16 kPa, quick heating, and a rich set of attachments make the YT-85725 a practical solution for comprehensive home cleaning, upholstery, and car interiors.

Four operating modes

Cold water cleaning with suction – a mode designed for daily refreshing of upholstery, carpets, and rugs, as well as removing typical dirt.

Hot water cleaning with suction – water heated to approximately 60°C helps dissolve dirt more effectively and facilitates its removal from materials.

Steam cleaning with suction – a combination of hot steam action with simultaneous moisture extraction, increasing the effectiveness of cleaning demanding surfaces.

Steam-only cleaning – steam at temperatures up to 100°C allows for cleaning and refreshing moisture-resistant surfaces such as tiles, fixtures, shower cabins, mirrors, and windows.

Efficient extraction cleaning

The effective extraction of water and contaminants is ensured by a 600 W motor, generating a maximum suction power of 16 kPa. These parameters allow for efficient collection of dirty liquid from cleaned surfaces, reducing the moisture remaining in the material. A maximum airflow of 12 l/s and a suction power of 60 Air W support the efficient removal of contaminants into the dirty water tank.

The extraction brush combines three stages of operation – spraying, mechanical distribution of water over the material, and suction of the dirty liquid. This ensures that cleaning is efficient and eliminates the need for multiple separate devices.

Hot water and steam

The heating system with a power of 1200 W prepares water for operation in hot cleaning mode and generates steam. Water can be heated to approximately 60°C, which aids in dissolving dirt during the cleaning of textile surfaces. Steam reaches temperatures up to 100°C, and its preparation takes about 30 seconds. A working pressure of 1 bar ensures stable steam delivery during cleaning, while a flow rate of 30 ±10 ml/min allows for precise dosing of moisture.

Working time

Over 30 minutes allows for comfortable completion of most household tasks without the need for frequent water refills.

Spacious tanks for clean and dirty water

Separate tanks facilitate maintaining hygienic working conditions. The clean water tank has a capacity of 1600 ml, while the dirty water tank holds 1500 ml. This solution allows for longer operation without the need for frequent water refills and tank emptying.

The water flow rates are:

• cold water: 330 ±50 ml/min

 

• hot water: 330 ±50 ml/min

 

• steam: 30 ±10 ml/min

Self-cleaning system function

The set includes a special self-cleaning cover that facilitates flushing the internal channels of the device after use. Once attached, water flows through the nozzle, hose, and pipe instead of being sprayed outside. This allows for the removal of water and dirt residues from the spraying system, making it easier to prepare the device for the next use.

Convenient working range

The flexible suction hose, measuring 1.2 m in length and 32 mm in diameter, makes it easier to clean upholstery, car seats, and hard-to-reach areas. The power cord, measuring 4 m, increases freedom of movement during operation. The housing with an IPX4 protection class ensures resistance to splashes, which is particularly important when working with water and steam.

Certificates

CE and CB certificates confirm the device's compliance with current safety and quality requirements.

Practical equipment

The set includes:

• extraction brush

 

• crevice nozzle

 

• fabric steaming and refreshing nozzle

 

• window cleaning nozzle

 

• self-cleaning cover

 

• microfiber attachment

 

• flexible hose

 

• hose storage hooks

Expandable set options

The functionality of the device can be expanded with the optional YATO YT-85726 accessory set, designed for steam cleaning tasks.

The set includes:

• kitchen cleaning brush

 

• steam scrubbing attachment

 

• steam crevice brush

 

• small round brush with brass bristles

 

• steam round brush

 

• steam nozzle

Additional attachments facilitate cleaning of grout, fixtures, ovens, cooktops, hoods, and other hard-to-reach areas.

Applications

YATO YT-85725 is suitable for cleaning and refreshing:

• furniture upholstery

 

• sofas and corner couches

 

• upholstered chairs and armchairs

 

• mattresses

 

• carpets and rugs

 

• car interiors

 

• ceramic tiles

 

• shower cabins

 

• bathroom fixtures

 

• mirrors and windows

 

• clothing and other fabrics intended for steam refreshing

Technical specifications

• rated power: 1800 W

 

• motor power: 600 W

 

• heating system power: 1200 W

 

• max suction power: 16 kPa

 

• max airflow: 12 l/s

 

• max suction power (Air Power): 60 W

 

• hot water temperature: approx. 60°C

 

• steam temperature: up to 100°C

 

• steam heating time: approx. 30 s

 

• steam pressure: 1 bar

 

• cold water flow: 330 ±50 ml/min

 

• hot water flow: 330 ±50 ml/min

 

• steam flow: 30 ±10 ml/min

 

• clean water tank: 1600 ml

 

• dirty water tank: 1500 ml

 

• suction hose: Ø32 mm, length 1.2 m

 

• power cord: 4 m

 

• noise level: 82 dB(A)

 

• protection class: IPX4

 

• power supply: 220–240 V / 50–60 Hz

Set includes: vacuum cleaner, flexible hose, extraction brush, slotted tip, ironing tip, window cleaning nozzle, self-cleaning cover, microfiber cover, hose holdersWork type: wetWeight: 4.7 kgVoltage: 220-240 V a.c.Power: 1800 WHose length: 1.2 mWire length: 4 mProtection grade: IPX4Frequency: 50/60 HzElectric insulation class: IFunctions: washing with cold water with suction, hot water washing with suction, steam cleaning with vacuum extraction, steam cleaningHose diameter: 32 mmHeating time: 30 sWorking time: over 30 minWork mode switch: yesPressure: 0.1 MPaOperating vacuum: 16 kPaSuction power: 60 WMax. steam temperature: 100 ˚CMax. air flow: 12 l/sClean water tank capacity: 1.6 lDirty water tank capacity: 1.5 lHot water temperature: approx. 60 ˚C