Darbo laikas: I-IV 9:00-17:00, V 9:00-16:00 VI-VII nedirbame
Account
×
Perforatorius | akumuliatorinis | SDS PLUS su 2 X 4 AH baterijomis (YT-827724) (Code: YT-827724)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 683 62 800 arba el. paštu irankiugamalt@gmail.com.
Elpaštas:This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel.: +370 683 62800
Brand
Yato
Entity responsible for this product in the EU
TOYA S.A.More
Series
GRF
Symbol
YT-827724 The YATO 18 V cordless rotary hammer is an efficient tool designed for intensive assembly and installation work. With an impact energy of 2.8 J and an SDS Plus chuck, it excels in drilling into concrete, masonry, and other building materials that require high impact efficiency, as well as in hard stone (e.g., granite). The brushless motor ensures greater durability, higher efficiency, and stable operation under load. The tool's design has been developed for intensive use, providing durability and reliability during daily work in demanding conditions. Various equipment configurations allow you to select a set suitable for your existing 18 V battery system. Key features: brushless motor – a modern drive unit that reduces energy loss, decreases heating, and eliminates the need for brush replacement, resulting in longer lifespan and better performance when working with hard materials
high impact energy of 2.8 J – enables effective drilling in concrete up to a diameter of 26 mm; the appropriate impact force allows for efficient drilling of holes for anchors, expansion plugs, and electrical and hydraulic installations
three modes – drilling, hammer drilling, and chiseling – allow for precise adjustment of the working system
SDS Plus chuck – quick and tool-free bit changes and reliable transfer of impact energy; the system is compatible with a wide range of accessories available on the market
precise speed adjustment in the range of 0-950 rpm and impact frequency up to 4700 bpm allows for accurate start of drilling and stable operation in various materials with bits and crowns of different diameters
additional side handle increases stability when drilling into concrete, and the contoured main handle with a non-slip coating improves work comfort and ergonomics
Technical parameters: voltage: 18 V
impact energy: 2.8 J
rotational speed: 0-950 rpm
impact frequency: 0-4700 impacts/min
chuck type: SDS Plus
max. drilling diameter:
26 mm in concrete (with a spiral bit)
68 mm in silicates, ceramic brick (with a core bit)
motor: brushless
Available versions: YT-827724 – tool with 2 batteries 4 Ah and charger
YT-827725 – tool with 1 battery 4 Ah and charger
YT-827726 – tool only
Yato
Entity responsible for this product in the EU
TOYA S.A.More
Series
GRF
Symbol
YT-827724 The YATO 18 V cordless rotary hammer is an efficient tool designed for intensive assembly and installation work. With an impact energy of 2.8 J and an SDS Plus chuck, it excels in drilling into concrete, masonry, and other building materials that require high impact efficiency, as well as in hard stone (e.g., granite). The brushless motor ensures greater durability, higher efficiency, and stable operation under load. The tool's design has been developed for intensive use, providing durability and reliability during daily work in demanding conditions. Various equipment configurations allow you to select a set suitable for your existing 18 V battery system. Key features: brushless motor – a modern drive unit that reduces energy loss, decreases heating, and eliminates the need for brush replacement, resulting in longer lifespan and better performance when working with hard materials
high impact energy of 2.8 J – enables effective drilling in concrete up to a diameter of 26 mm; the appropriate impact force allows for efficient drilling of holes for anchors, expansion plugs, and electrical and hydraulic installations
three modes – drilling, hammer drilling, and chiseling – allow for precise adjustment of the working system
SDS Plus chuck – quick and tool-free bit changes and reliable transfer of impact energy; the system is compatible with a wide range of accessories available on the market
precise speed adjustment in the range of 0-950 rpm and impact frequency up to 4700 bpm allows for accurate start of drilling and stable operation in various materials with bits and crowns of different diameters
additional side handle increases stability when drilling into concrete, and the contoured main handle with a non-slip coating improves work comfort and ergonomics
Technical parameters: voltage: 18 V
impact energy: 2.8 J
rotational speed: 0-950 rpm
impact frequency: 0-4700 impacts/min
chuck type: SDS Plus
max. drilling diameter:
26 mm in concrete (with a spiral bit)
68 mm in silicates, ceramic brick (with a core bit)
motor: brushless
Available versions: YT-827724 – tool with 2 batteries 4 Ah and charger
YT-827725 – tool with 1 battery 4 Ah and charger
YT-827726 – tool only
You may also be interested in
.jpg)
Jūsų peržiūrėtos prekės
Sekite mus
