Welding inverter MIG/MAG + MMA +TIG-LIFT (KD1834) (Code: KD1834)
Išparduota
Zoom image
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 683 62 800 arba el. paštu irankiugamalt@gmail.com.
Welding inverter is used for MIG/MAG, MMA (any type of welding electrodes) and TIG Lift welding. The electronics of the device are based on IGBT transistors, which combine the advantages of two types of transistors, the ease of control of field-effect transistors, and the high breaking voltage and switching speed of bipolar transistors. Use only certified gas cylinders.
The device is versatile, for example, for outdoor work and all types of repair work inside buildings.
- Supply voltage: 230V
- Welding methods: MIG/MMA/TIG-LIFT
- Nominal welding cycle: 60%
- Welding current in 100% cycle: 20-180A
- Wire spool supported: up to 5 kg
- Insulation class: F
- Degree of protection: IP21S
In the set:
- MMA KD1834 inverter welding machine
- MMA DIN welding cable with electrode holder
- DIN ground cable with clamp
- Protective panel
- A hammer with a brush
Welding method MIG/MAG:
- Power 230V/50Hz
- Energy consumption 6.1 kVa
- Welding current range 40-240A
- Welding voltage range 26-25A
- Wire supply - internal
- Wire/electrode diameter 0.6/ 0.8/ 1.0mm
Welding method MMA:
- Power 230V/50Hz
- Energy consumption 6.8 kVa
- Welding current range 20-180A
- Wire/electrode diameter 2.5-5mm