Siekdami pagerinti Jūsų naršymo kokybę, statistiniais ir rinkodaros tikslais šioje svetainėje naudojame slapukus (angl. „cookies“), kuriuos galite bet kada atšaukti pakeisdami savo interneto naršyklės nustatymus ir ištrindami įrašytus slapukus.



Grąžtų galandymo staklės 3-16 mm (73470) (Kod.: 73470)

Kaina su PVM : 29.90 EUR


Kiekis:
 




* - privalomi laukai
Jūsų vardas *.
El.paštas *.
Jūsų telefonas
Dėl: Grąžtų galandymo staklės 3-16 mm (73470)

Užklausa *.

Aprašymas :

Sharpener for sharpening the drill bit made of steel.
The sharpener is equipped with two working heads to sharpen a wide range of drill bits.
The device is designed for intermittent operation. Diameter of sanding plate: 58 mm; 70 mm
Drill diameter:
- 3 mm - 10 mm (plate 58 mm)
- 8 mm - 16 mm (plate 70 mm)
The apex angle of the drill: 118 degrees Destination / Application
The sharpener is used to sharpen blunt drill bits.
It is possible to sharpen drills for drilling in metal or universal drills.
The sharpener is not intended for sharpening drill bits made of ceramic materials, wood drills, feather drills, drills, crown drills and blades of a different shape than steel drills and universal drills.
How to use
Sharpening of the drill:
Choose a hole in the head of the same diameter as the drill bit to be sharpened. Turn on the sharpener with the switch and wait for the grinding disc to reach the rated speed. Insert the drill into the hole in the head and, after hearing the grinding noise, move it forwards and backwards for 5-10 seconds, simultaneously pressing the drill with a slight force to the grinding disc. Remove the drill from the head, and then repeat the operation for the second edge of the drill bit. The edge is always closer to the outer edge of the head. The head openings have tongues limiting the rotation of the drill in the hole. This facilitates the sharpening process.
Warning! Each surface should be sharpened with the same amount of time and pressed with the same force. This will prevent uneven sharpening of the drill. After sharpening the drill, the results of the work should be evaluated. If the tip of the drill after sharpening turns blue or different from the natural color of steel, this means overheating of the surface and the needle pressure of the grinding tool should be reduced to the grinding plate during sharpening. If, after sharpening, the edges of the drill bit are not the same length, the time and sharpness of each drill bit should be corrected.
Contents of the package
- sharpener
- 2 starters
- 2 shields Technical data
Index Number 73470
EAN 5906083734700
Toya brand
Unit SZT
Gross Weight (kg) 2.7500
Power [W] 70
Rotational speed [1 / min] 1600
Diameter [mm] 3-16

BANKO kortelės!

Pas mus galite atsiskaityti BANKO kortelėmis! Maloniai laukiame apsilankant!

visa mastercard logo

Išsimokėtinai!

Pas mus galite pirkti išsimokėtinai!

logo sb lizingas2

PREKIŲ PRISTATYMAS


Šiandien: 2019-08-18

Katalogas

Mes rūšiuojam!

atliekos

Mes rekomenduojam!


drd tools